2021.10.26 15:43 YinWithoutYang What's The Safest Type of Investment?
2021.10.26 15:43 mainplank SHEEEEESH WHAT A W (Also looking for gold messi)
|submitted by mainplank to MADFUT [link] [comments]|
2021.10.26 15:43 Jyrz Time For ALL The Side Quests! Live with Tales of Arise NOW on Twitch!
|submitted by Jyrz to JyrzAndRMoneyStream [link] [comments]|
2021.10.26 15:43 Hypyrionn What’s the deal with mods?
So I’m very interested in the 100x speed mod. It appears if you don’t use anything online or anything that directly and blatantly changes your monkey money, you are fine? I’m not even trying to change my monkey money, I would feel too guilty. I just want to pump up that speed. Also, for those who have had mods, what happens if I join a coop? Will it just desynch me, ban me, or just pause it’s effect until I’m done playing with my friends? Thanks in advance guys :)
submitted by Hypyrionn to btd6 [link] [comments]
2021.10.26 15:43 imnotyouu meirl
|submitted by imnotyouu to meirl [link] [comments]|
2021.10.26 15:43 Sensitive_Swimming64 Next TOP HIGH??! #AMC #PHUN #MARK
|submitted by Sensitive_Swimming64 to wallstreetbets [link] [comments]|
2021.10.26 15:43 GlamrockShake iPod Quietly Removed from Apple Site Navigation
2021.10.26 15:43 humanpneuman Anyone Else Hear Nothing From TOOL Support?
I was refunded a Gold package for DC. I've e-mailed Christy a few times, but I haven't heard anything in terms of restitution whereas other people were offered alternate tickets weeks ago.
Has anyone else not received a response? Am I shit out of luck at this point?
It doesn't seem fair, but I'm not holding a grudge. I'm super stoked for the people who didn't get refunded as well as the people who got regular tickets.
submitted by humanpneuman to ToolBand [link] [comments]
2021.10.26 15:43 reddit_feed_bot CBN.com: 'Sanctuary for Freedom': Montana Governor Pushes Back Against Federal Overreach, Takes a Stand for States' Rights
|submitted by reddit_feed_bot to TheNewsFeed [link] [comments]|
2021.10.26 15:43 idkwotafak trading psx pets and 90k gems for rhd! ( pets in comments!)
2021.10.26 15:43 No-Video9994 I just feel like this is a scam lmaooo. 5-8 minute videos for $20 also they can’t be anything sexual so I’ll pass on it 🤷
|submitted by No-Video9994 to Fabledfawn [link] [comments]|
2021.10.26 15:43 Sebgamer9388 Go battle leauge challenges add me.
First add 3753 0359 4961 (my trainer code)
Then send each other a gift.
Then I will send challenge request in any leauge that you comment
Then click rematch after the battle is done and stop doing it when you want to stop.
submitted by Sebgamer9388 to PokemonGoFriends [link] [comments]
2021.10.26 15:43 Vekxin_Sama92 So... About the single take uploading to Google photos situation.
So idk if anyone has figured it out or have posted it before. But you actually can natively separate single take items so that they all upload individually to Google photos.
All you have to is once you take your single takes, just go to them in the gallery, do the swipe up thing to view everything in that single take session. After that just long hold on one item, bring up the multi select a d then select all, or whichever ones you really want to upload singularly. Then click the little download symbol at the bottom bar and viola. They should all upload singularly now BUT the base single take will still upload as a burst image, you'll just also have the single items there already sperated out as well.
submitted by Vekxin_Sama92 to S21Ultra [link] [comments]
2021.10.26 15:43 deeetsss Two different printers froze mid print but kept heating up. Overheat protection is enabled but didn't work
I have six Ender-3 pros that are all a little over a year old. And have been printing with them regularly since I got them. In the past 2 weeks I have had two different printers freeze mid print. The scary part is that when they froze it looks like the hot end and heated bed just kept heating up and they got extremely hot. Luckily I was home on both occasions and could smell the plastic before anything bad happened.
The thing is over heat protection is enabled on both printers. I know because I immediately turned the printers off and on again once it happened, and then the over heat protection warning went off. As a result of this I am only running the printers while I am awake and near them.
I have read a few things to see what the problem could be, and it sounds like it could be an SD card error. I have since replaced both SD cards. On the first printer that froze I have also changed the control board to the SKR E3 Turbo. Will be changing the other once I receive the new board.
Is this a known issue? Both printers had stock Creality 32 bit boards with Marlin 2.0 bugfix branch loaded onto them. Do you think changing to the SKR E3 board would stop this issue from happening?
submitted by deeetsss to 3Dprinting [link] [comments]
2021.10.26 15:43 SinoBot Huawei Enters the Photonic Chip
|submitted by SinoBot to SinoDiscussion [link] [comments]|
2021.10.26 15:43 itsnah Naruto discord server with a ton of content! Its all free you just need a couple of invites and they're easy to get.
|submitted by itsnah to KushinaNudes [link] [comments]|
2021.10.26 15:43 arsenalkms The Waiter at Red Bull’s Saturday Night Team Dinner
|submitted by arsenalkms to formuladank [link] [comments]|
2021.10.26 15:43 sylisyli [PC] [Discussion] Having 2 auctions 23hours left
2021.10.26 15:43 Realistic_Eye_6110 bbig
2021.10.26 15:43 jobsinanywhere Who is Jinnkids’s wife Ana Abulaban?
2021.10.26 15:43 infil__traitor I've been learning songs by people from Indiana. Indiana really puts out some hits.
|submitted by infil__traitor to Indiana [link] [comments]|
2021.10.26 15:43 Lost_Background6198 Was I hit on?
So I (mid thirties)was at a big retail store minding my own business and walking in an aisle to get some peanut butter. This tall, young and cute guy approaches me and asks me where I bought my polo shirt. I’m a bit surprised, my polo shirt was a bit stylish I guess but nothing warranting to approach a stranger about. I answered that I wasn’t sure and that it was perhaps from a golf store. To my surprise, he started to ask me about golf and seemed quite interested to talk to me. This is quite a bit unusual for that to happen to me, I don’t recall the last time that I have been hit on, especially by a young and cute guy. I’m also from a country and city where that kind of behaviour (ie approach strangers in retail store to hit on them) is not very frequent. Anyway, my initial thoughts were that perhaps he wanted to rob me, or perhaps distract me while someone else was doing something to my car (silly, I know!). And I was in rush as I needed to pick up someone from the airport. So I cut things short and told him that I was in a rush and needed to go.
Never thought of this again until recently when I read on here that someone’s “go to” to approach a stranger that they want to hit on is to initially ask them about their clothing… and then I wondered if I hadn’t been a jerk to a cute guy that was hitting on me…
Thoughts? What are the chances that he was hitting on me? Also, what are your tricks if you want to start chatting with a stranger?
submitted by Lost_Background6198 to askgaybros [link] [comments]
2021.10.26 15:43 JuicerOfNoodles SONG OF THE DAY: “Brand New Funk 2K7 - DJ Jazzy Jeff ft. Peedi Crakk” , 2007
|submitted by JuicerOfNoodles to rarekoolaid [link] [comments]|
2021.10.26 15:43 stable_maple AT on e-ink looks incredible. Anybody else read on an e-ink device?
|submitted by stable_maple to AllTomorrows [link] [comments]|
2021.10.26 15:43 Grimluck_Foster And so, the questions occupied the man's mind: What is this monstrosity? Why Ninos? And why did he make this?
|submitted by Grimluck_Foster to FireEmblemHeroes [link] [comments]|